How To Apply Concrete Sealer With A Roller. Remove all oil, grease, stains, dirt, and dust from the concrete. Applying the sealer with a driveway roller.
If you choose a surface sealer, such as an epoxy or an acrylic, the process is similar. Use a circular motion for even distribution. Open up the concrete with an etching solution.
Table of Contents
If You Choose A Surface Sealer, Such As An Epoxy Or An Acrylic, The Process Is Similar.
Open up the concrete with an etching solution. Place the roller cover on the handle of the roller and then get rid of any wrapping. Apply a thin coat of sealer using a roller or sprayer.
Apply Sealer Concrete With A Roller.
Ideally, you should wait until it’s dry before applying it. Once dry add a second layer if required. While a sprayer will provide a better finish, you can also apply the material using a squeegee or a brush.
To Apply Concrete Sealer With A Roller First Stir And Prepare Your Sealant, Next Pour Enough In The Center Of The Area You Are Sealing And Use Your Roller To Work It From The Middle Outwards, Cover The Area Completely With A Thin Even Layer And Let It Dry.
To apply concrete sealer with a roller first stir and prepare your sealant, next pour enough in the center of the area you are sealing and use your roller to work it from the middle outwards, cover the area completely with a thin even layer and let it dry. In this video we'll show you how to avoid roller marks or lap lines when applying concrete sealers. Following any instructions provided by the manufacturer, you will generally want to spread out the sealer evenly over the concrete using.
Apply A Second Coat In The Opposite Direction.
Strip any existing sealer from the surface. The most efficient way to avoid roller marks when applying concrete sealer is to use a light hand and apply thin coats one at a time. How to apply concrete sealer.
Silicate Sealers Are Sealers Designed To Increase The Strength And Density Of The Concrete.
Stir the can of sealer with a clean stick before you begin so it's thoroughly mixed. Place the pan on a surface that is flat. Remove all oil, grease, stains, dirt, and dust from the concrete.